Hardened steel, 4" x 4" x 3/4" block

Swiss pattern European file with great durability and hardness with a 6" length and 2 cut

8 oz. jar of white paste flux used for soldering non-ferrous metals

1# white paste flux for copper, brass, or silver soldering

Stainless steel bezel mandrel, 11" length

Hardened tool steel mandrel for ring sizing.  11 1/2" length.  A nice gradual taper to accommodate sizes 1 through 15.

6 piece needle file set, Cut 2 

These nylon jaw pliers are great for straightening wire without marring it.  Can also be used for many other jewelry uses.  Replacement jaws available.   Length 5 3/4"

These are a Swiss saw blade that I have found to be excellent in jewelry use.  4/0 size

This titanium pic is excellent for use when soldering non-ferrous metals.   6 1/2" length

Gentec has been selling torches and welding accessories worldwide for over 60 years.  I personally use a torch from Gentec, to make sure that the product was good, and I am truly satisfied with this product.  I have always used Smith products and this is comparible.  The "Small Torch"  provides stable and precise concentrated feather flame.   Durable and flexible hoses "B Connection" (9/16") with "A"(3/8") fittings adapter included.  All components carry a limited two year warranty from the factory.    Each basic kit comes with The Small Torch handle, five tips, and 12’ oxygen and fuel hoses

Dumont Diamond tweezers have finely serrated jaws to hold stones and small objects firmly.  6 1/2" length

3/4" MEDIUM snap on sanding disc with aluminum oxide on a flexible backing.  Used with mandrel BRS279.00.

3/4" COARSE snap on sanding disc with aluminum oxide on a flexible backing.  Used on mandrel BRS279.00

This natural agate stone burnisher is perfect for metal clay work, Keum-boo applications and applying gold and silver foil.  Also works to burnish unfired metal clay.  Can be used like a steel burnisher for smoothing metals and closing bezels, but unlike steel burnishers, they will not damage stones.

8 1/2" in length

This item is by special order only

This natural agate stone burnisher is perfect for metal clay work, Keum-boo applications and applying gold and silver foil.  Also works to burnish unfired metal clay.  Can be used like a steel burnisher for smoothing metals and closing bezels, but unlike steel burnishers, they will not damage stones.

8 1/2" length

This item is special order only

Use as a base for riveting, drilling and staking small parts.  This hex anvil is case hardened and polished.  It has 15 holes fro 3/64" to 1/4" (1.2mm to 6.4mm)

Three piece set with comfort grip handle.  

Convenient 1 oz. bar of beeswax is used for thread conditioning to strengthen and straighten.  Prevents ends from fraying by binding the thread fibers together.  

I suggest to students to run their saw blade through the wax once to lubricate the blade while cutting metal.

Hardwood pin with steel block attached to the holder that clamps onto the bench, up to 2" thick surface.

This is the perfect tool for holding metal, wood or plastic for easy sawing and less hand fatigue.  With quick release and self-adjusting action, it is a necessity for the jeweler's bench as well as for the hobbyist or craft person.  Hardwood construction with a powerful spring and non-slip jaws grip metal from gauges 32 to 4.  Fits in standard bench slot or clamps on table.

Bending pliers also feature replaceable nylon jaws for bending rings sizes 6 1/2 and larger.  5 1/4" length

With a gentle arc for bracelets, the nylon jaws of this plier cannot scratch.  Makes reshaping bracelets easy.  Order extra sets of nylon jaws and customize your own shape jaws for any task by simply carving the nylon to your shape of choice.  Length 5"

Finely polished bracelet mandrel are an excellent quality American made mandrel.  The oval bracelet mandrel tapers from 2 1/2" x 2 3/4" to 1 1/2" x 1 3/4".  The length is 8 1/2".

This oval bracelet mandrel is a smooth steel designed for bracelets with a taper from 2 1/2" to 1 3/4".  14" length

Smooth steel mandrel designed for bracelets with a taper from 2 1/2" to 1 3/4". 15" length

This wood bracelet mandrel is perfect for shaping and removing dents or kinks from bangles or bracelets made of sfter, non-ferrous metals.  Made of hardwood, this mandrel measures 15" long, with a taper from 1½" to 2½" diameter.  Value priced, you will get years of service from this vbeautifully made wood mandrel.

Length 15"

This small brass hammer with hardwood handle will give the user years of service.  The head is 5/8" diameter and weighs 3 ounces.  Overall length 9 1/8".

Four row burshes made in Germano of 0.10 mm brass set in a wooden handle.  Overall length 8 5/8"  Excellent for precious metal clay (PMC) and enameling.

This red satin finish buff is a non-woven wheel incorporating aluminum oxide and treated with a special resin.  This buff is more aggressive, giving a satin finish to gold, silver and other non-ferrous metals.  Each wheel has a ¼" hole, perfect for tapered spindles.

Size 4" x 1 1/8"

When the job requires a larger flame with more heat, this torch performs.  The Max Flame Torch is ergonomically designed with all the required safety features. 

2,500 degree Farenheit heat output

40% larger tank

7 1/4" height

Sturdy no tip base

This simple center punch is perfect for all non ferrous metals.  Made of high quality tool steel, the point is well tempered for long life.  4 1/2" length

This hard charcoal block will last three to five times longer than a soft block.  This block has better heat retention giving the user the desired reflective heat to solder faster and easier with better flow.  Measures     5 1/2" x 2 3/4" x 1 1/4"

1 1/8" diameter face forged head with an overal length of 11".  

1 1/4" diameter forged head on a hardwood handle.  Overall length 11"

5" diameter chemkote yellow buff used with tripoli, black emery, white diamond or other coarse cutting compounds

Surface scratches are easily removed with this more aggressive specially treated buff.  Longer lasting with excellent compound retention.  Excellent for use with tripoli, white diamond, black emery or other abrasive compounds.  The diameter is 6", 50 ply with 4 rows of stitching.

Copper tongs reinforced with rivets at the end and made of a heavier gauge of copper which provides more strength. Ends are curved.

Steel shaft mounted in hardwood andle secured by a steel pin to secure a ceramic melting dish included with the handle.

High tech lubricant for most cutting applications.  Use when sawing, drilling or drawing wire to insure cooler, cleaner cuts.  The two ounce stick is made in the USA and comes in a convenient push up plastic sleeve.

This small dapping block offers 22 depressions to allow a variety of shapes to be formed.  There are 8 half-cylinders on the sides of the block ranging from 3/16" to 1" and 14 half-spheres on the front and back ranging in size from 1/8" to 1".  Overall size 4" x 2 1/2" x 7/8".

Large cutter features five sizes ranging from 1/2" to 1".  Cut perfect cirlces every time!  The holes have been drilled, reamed and then honed to make the finest and cleanest cutter available.  The punches are oil-quenched tool steel and drawn for hardness and durability.  The bottom base is case-hardened and ground.  Cutes metal up to 14 gauge.  Measures 3" x 2 3/4".

This flat dapping block features 27 holes for dapping in.  The opposite side is flat and polished and can be used for hammering.  The depressions range from 1/16" - 1" in diameter.  It measures 7/8" x 2 1/2" x 5 1/8" and weighs 2 lbs. 9 oz.

6" length wooden block with 3 round dapping spaces on one side and 5 on the other side (maple)

6" length wooden dapping block with 3 oval dapping areas on one side and 3 smaller ovals on the other  (maple)

6" length tear drop shaped wooden dapping block with 3 tear drops on the front and 3 smaller on the othe side (maple_

Two hardwood punches and dapping block for shaping or removing dents.  The block features different size depressions on each side and is 2 1/4" square.

Set of 12 steel punches with highly polished heads for shaping metals or use with dapping dies.  Includes sizes 1/2", 9/16", 19/32", 5/8", 11/16", 23/32", 3/4", 25/32", 13/16", 7/8", 15/16", and 1" diameter openings.  Includes a wood stand to hold punches.  Weight 5.25 pounds

This wood forming block is made of hardwood and hand sanded to a smooth finish.  Use this block when working with fine or soft metals.

Features include:  

Four round depressions 1¾, 1 7/8", 2 1/8", and 2 ¼" diameters

Five "U" channels

Two 90° channels

Two 45º grooves

2¾" x 2 ¾"

This newly added dapping block has 18 depressions and features 24 punches to dome a great many sizes.  Punches range from 3.5mm to 25.4mm and are made of case-hardened steel for years of performance.  Depression in the 2"x2"x2" blcok range from 3 to 35 mm.  This set comes with a hardwood stand to keep it all well organized.

3/32" shank Sqiss made twist drills with electroplated diamond particles for drilling stones, pearls, glass or ceramics.  Use with standard handpieces and a small amount of water or oil as lubricant.  All drills are mediu-fine grit.  Set of 6 bits

4" easy to use quick adjust setting nut

File cleaner removes small particles that clog teeth and reduce the file’s ability to cut.  8 1/4" length

Precision 6" hand file, half round, 6" length, cut 2.  A SWiss pattern European file milled to the exact shape and size desired.

4" diameter fine, soft combed muslin buff.This buff is used witgh polishing compounds to produce a final, high polish.  Stitched 4 rows with shellac center.

Made of very fine, soft combed muslin, stitched buff used with polishing compounds to produce a final, high polish.  4 rows stitched, 5" diameter, 50 ply.

Flat, size 1 to 15 finger gauge

This flexshaft is made by Foredon and comes complete with a #30 handpiece, foot pedal, motor, and flexible shaft.

These Super Grip gloves offer the best in hand and finger protection.  Slightly tacky palm is nitrile coated fro agreat grip and extra puncture resistance.  The remainder is woven poly which breathes, keeping hands cool  Gloves are sold by the pair.

Size Small

German made hammer with nylon faces.  Each hammer has a seasoned ash handle with a drop forged head and two durable nylon faces.  Spare faces are available by the pair in high impact nylon and simply come off with a half turn.  7/8" (22mm) diameter face

German made hammer with nylon faces.  Each hammer has a seasoned ash handle with a drop forged head and two durable nylon faces.  Spare faces are available by the pair in high impact nylon and simply come off with a half turn.  1 1/16" (27mm) diameter face

These USA made plastic head mallet is made of a non-porous material that will not mar and is easily cleaned.  Excellent for applications with precious metals where marring is a problem.  The seasoned hardwood handle gives the user a sure grip.  Size 3 (1 3/4" diameter, 9 oz. weight)

Hardwood handle with strong metal collar. Can be used with all tang files.  This handle will allow you to screw on your 6" file.

A cured hardwood block 4 1/2" x 6" with 88 holes for organizing burs, needle files, beaders, mini brushes, etc.  Each hole is 1/8" in diameter and is slanted so the usere can see all instruments at a glance.

Reversible two-in-one ingot mold.  May be used to make flat stock or wire stock from scrap metal.  Flat stock is 3" long by 2" wide by 1/8" thick.  Wire sizes are 3" long by 2.5, 3.5, 4.5 and 6 mm in diameter.  Sturdy C-clamp holds both halves together tightly.  Width of flat stock can be varied.

These ceramic inserts are used with the UltraLite Kiln and are specifically used when firing your PMC (Precious Metal Clay) or other metal clay products.  These ceramic inserts allow the UltraLite kiln to heat quickly and evenly.  They come in a set of three.

This item is special order only

These brass covers are used in conjunction with the UltraLite Kiln.  They are specifically designed for the Keum-boo technique used with PMC (Precious Metal Clay) or other metal clays.  There are two to a set.

This item is special order only

The UltraLite Beehive Jewelry Kiln was originally developed for fine metals granulation and enameling, but is the perfect choice for firing metal clay products or Keum-boo.  The kiln heats quickly and thoroughly.  The firing surface is 3" in diameter by 1 ½" high and the element produces a working temperature of 1550° F.  The kiln body consists of high insulating ceramic fiber.  Comes with standard 15" cord and a stainless steel working spatula.  Complete instructions included.  Optional red brass covers specially designed for Keum-boo can be inserted above the element of the UltraLite kiln to moderate heat inside the kiln.  One plate for flat pieces, the other with a depression allows for non-flat pieces.  Optional three piece textured Ceramic Disc Set is specially designed to be inserted in the UltraLite kiln for firing metal clay.  With the ceramic insert, the kiln heats quickly and evenly.  Made in the USA>  Recommended for professional adult use only.

KLN 100.00       Ultralite Kiln     5 ½"x5½"x6½"              $169.00

KLN 100.10       Keum-boo Plates, set of two                    $29.95

KLN 100.05       Ceramic Inserts, set of three                    $23.50

1 3/4" diameter face leather mallet

A revolutionary ultrasonic concentrate powder which, when mixed with water, forms an excellent cleaning concentrate which removes buffing rouge instantly and attacks tripoli within 45 seconds.  One 32 ounce tub makes up to 32 gallons making it an outstanding value.

Easy on easy off  for use with a snap on sanding discs.

Threaded mandrel w/nut 3/32" shank used with cylinder/barrel type silicon, cratex etc.

Stainless steel round bezel mandrel, 7 3/4" length, tapers from 1/2" to 1/32"

Stainless steel square bezel mandrel, 11" length

This round hoop mandrel is hard chrome plated steel with a highly polished surface and tapers from 3/8" to 2" (10 mm to 52 mm) for a wide range of rings, earrings, hoops and bracelets, giving it a great variety of uses for goldsmiths, silversmiths, jewelers and bead artists.  The weight of solid steel gives it the heft that one needs to more easily work non-ferrous metals.

Weight  4# Length 12"

12 piece set of assorted needle files with handle 4" mini files, all 2 cut

These new alphabet letters include the "&" sign to make a 27 piece set.  The number set contains 9 punches numbered 0 - 9.  Made of tempered steel for years of service, these sets are economical, compact, extremely useful, and come to you in a durable plastic box. punches are 2 3/8" in length and available in two character heights.

This set is 1/16" height x 2 3/8" length

High quality nylon lines the jaws of this plier which are excellent for straightening wire, especially colored wire.  Stainless, box jointed with comfort grips.  Replacement jaws available.

Oblique cutters feature an angled head so the tip can reach tight places.

These lenses are made of the highest quality optical glass.  Lenses are interchangeable and the headband is leather lined for comfort.  High impact plastic visor.  3 1/2X magnification  Focal range 4"

These lenses are made of the highest quality optical glass.  Lenses are interchangeable and the headband is leather lined for comfort.  High impact plastic visor.   1 1/2X magnification  Focal range 20"

These lenses are made of the highest quality optical glass.  Lenses are interchangeable and the headband is leather lined for comfort.  High impact plastic visor.  1 3/4" magnification  Focal range  14"

These lenses are made of the highest quality optical glass.  Lenses are interchangeable and the headband is leather lined for comfort.  High impact plastic visor.  2X magnification  Focal range 10"

These lenses are made of the highest quality optical glass.  Lenses are interchangeable and the headband is leather lined for comfort.  High impact plastic visor.  2 1/2X magnification  Focal range  8"

These lenses are made of the highest quality optical glass.  Lenses are interchangeable and the headband is leather lined for comfort.  High impact plastic visor.  2 3/4X magnification  Focal range 6 "

Replacement lens #3 for viewing 1.5x at 20".

Replacement lens #7 for Optivisors with a magnification of 2 3/4X.

Replacement lens for Optivisor 3.5x 4"

Replacement lens for Optivisor 1.5x at 20"

Replacement lens for Optivisor 2.0x @ 10"

Replacement lens for Optivisor 2.5x @ 8"

Flexible blade palette knife for mixing and projects where a small spatula is useful.  This is used frequently when working in PMC (Precious Metal Clay)

6" length

Reversible chuck pin vise, 4 1/2" length with two tempered steel reversible chucks.  Capacity of 0 - 3mm

Concave/convex ring bending pliers  5" length, this is a value series plier but well made and works wonderfully.

These European made cutters have an ergonomic cushion grip handle and a smooth spring return.  They offer strength in a precision side cutter.  Jaws pass one another ever so slightly but do not touch, and therefore do nut dull as quickly as conventional cutters.  5" in length

German ergonomic grip 4 1/2"  chain nose plier Box-joint construction and double leaf springs with a handle width of 3/4" and a soft non-slip texture, great for repetitive use.

Economy brand of end cutter.  This product is a good buy and product.  4 3/4"Length

German ergonomic grip 4 1/2" flat nose plier  Box-joint construction and double leaf springs with a handle width of 3/4" and a soft non-slip texture, great for repetitive use.

German ergonomic grip 4 1/2" oblique cutter, flush. Box-joint construction and double leaf springs with a handle width of 3/4" and a soft non-slip texture, great for repetitive use.

German ergonomic grip 4 1/2" round nose plier  Box-joint construction and double leaf springs with a handle width of 3/4" and a soft non-slip texture, great for repetitive use.

The pliers are made for students, craftspeople or anyone who needs usable pliers and cutters at a reasonable price and consistent quality.  These pliers feature green PVC grips, double leaf springs, box joint construction and brush finish in the popular 4 1/2" pattern.

These pliers are made for students, craftspeople or anyone who needs usable pliers at a reasonable price and consistent quality.  This series features green PVC grips, double leaf springs, box joint construction and brush finish in the popular 4 1/2" pattern.  These are flat nose pliers.

This newly deisgned hole punch plier will punch copper or silver as thick as 18 gauge.  With ergonomic handles and tempered replaceable pin, these pliers will save you time and money.  Now available in two models: 1.25 mm or 1.8 mm pin diameter.  The pliers are made of thick carbon steel and come with an extra replaceable pin.  Additional replacement pins available in pakcs of five.  

Length 5 1/4"

This plier is number PLR 133.50 which has a 1.8 mm hole punch

Economy line of plier, a very good buy and  good quality

This pair of sidecutters provide a semi-flush cut.  They are part of the value series pliers and cutters with box joints and green handles.  4 1/2" in length

German made stone setting plier has one smooth jaw and one notched jaw fro bending and tightening prongs.  The polished jaws allow access to tight spots.

"Brilliant" products are treated with a newly developed chemical agent which cuts through tarnish better than other cloths and inhibits tarnish from reappearing.  You can polish brass, chrome, copper, silver and gold brilliantly without getting rouge on your hands.

Size 4" x 6" 

Annealing pan rotates 360 degrees on ball bearings for unlimited access to work.  Pan is 7" in diameter and comes with 1 lb. of pumice stone.

This wooden ring clamp has leather jaws for holding rings and other objects while filing, mounting, etc.  6" length

Light weight Aluminum finger sizer, blue and silver in color, measures 1-15.  Half sizes are in blue, whole sizes are in silver.  Inexpensive.

This American made mandrel is of case hardened steel and are finely polished.  This mandrel is grooved to accommodate rings with stones.  It is graduated in half sizes from 1 to 16, overall length is 13 1/2"

This large size mandrel accommodates whole sizes 16 to 24.  It is American made of case hardened steel and are finely polished.

This mandrel is made of hardened tool steel, 11 1/2" long with a nice gradual taper to accommodate sizes 1 through 15. This mandrel is non-grooved

This 6" x 8" deluxe cotton rouge cloth offers great value.  It is impregnated with the finest quality red rouge on one side while the other side is left plain soft flannel for the final polish.  Quality made in the USA.

This rubber block is extremely hand on the bench, for filing, hammering, and other uses.  Made of a tough, firm, vulcanized rubber measuring 4"x4"x1" to give the user an excellent surface.  It enables one to remove dents and straighten metals without the fear of scratching or distorting, and can be used to secure parts for filings well.

NEW!  Sanding sticks in 6 grits: 6/0, 4/0, 3/0, 2/0, 1 and 2.  Tapered, half-round for flat surfaces or for inside rings and curved surfaces.  Excellent for all precious metals and PMC.  Each measures a total of 9 1/4" with a sanding surface of 6" which tapers from 3/4" wide to 5/16" wide at the tip.

5" jaw (125mm)

6" jaw (150 mm)

German made saw frame with 8" jaw depth.  Used for cutting wider/longer pieces of metal.  High-quality, well balanced frame with hardwood handle.  (This photo shows a 5" depth frame, please be assured that when ordering an 8" frame you will be receiving exactly that)

This new 500 gram scale with a superior load cell gives you the capacity you need.  500 grams by 0.1 gram, auto shut off, modes: gram, oz, dwt, ozt, tare function, letherette case, transparent cover which can also be used as a tray, powered by 4 AAA batteries. Measures 6" x 3 1/8" x 3/4" and weighs just 4.8 ounces.

Portable, with its compact slim design, the Gram 250 offers a 250g capacity x 0.1g, digital auto calibration and four different weighing functions-grams, ounces, dwt and ozt.  The scale has a 5" platform and operates on a nine volt battery.  It also offers parts counting capabilities and memory functions.  One year warranty.

5 1/4" length with a 1/8" tungsten carbide tip on aluminum holder

4" length, point reverses into body for safety, nickel plated body

These separating discs are 7/8" x .023" made of silicon carbide.  These can be purchased in a box of 100 or by the dozen.  Please specify which you would like to purchase.

Box of 100/$9.50

One dozen/$2.00

A economy line cutter.  4 1/2" length

Unmounted abrasive cylinder impregnated with silicon carbide.  Great for deburring, cleaning, smoothing and polishing metals.  3/4" x 15/32"  These can be purchased in a dozen quantity for 

$14.45 per dozen.

Unmounted silicon carbide wheel in fine grit, great for deburring, cleaning, smoothing and polishing metals.  7/8" x 1/8"  Available in dozen quantity, $6.45 per dozen

Unmounted abrasive wheels with impregnated silicon carbide are great for deburring, cleaning, smoothing and polishing gold as well as all other metals to a high luster.  Recommended maximum 1,000-5,000 RPM

Unmounted abrasive wheels with impregnated silicon carbide are great for deburring, cleaning, smoothing and polishing gold as well as all other metals to a high luster.  Recommended maximum 1,000-5,000 RPM.

These can be purchased in singles for $1.40 each

3/4" x 15/32" 

Unmounted abrasive cylinder impregnated with silicon carbide.  Great for deburring, cleaning, smoothing and polishing metals.  3/4" x 15/32"  These can be purchased in a dozen quantity for $8.00 per dozen or $1.00 each

This silicone, large cylinder, coarse abrasive wheel impregnated with silicon carbide is great for deburring, cleaning, smoothing and polishing gold as well as all other metals to a high luster.  Recommended maximum 1,000-5,000 RPM.

This knife edge extra fine silicone abrasive wheel is impregnated with silicon carbide is great for deburring, cleaning, smoothing and polishing gold as well as all other metals to a high luster.  Recommended maximum 1,000-5,000 RPM.

This coarse grit silicone knife edge wheel is impregnated with silicon carbide is great for deburring, cleaning, smoothing and polishing gold as well as all other metals to a high luster.  Recommended maximum 1,000-5,000 RPM.

This silicone, knife edge, medium grit abrasive wheel is impregnated with silicon carbide are great for deburring, cleaning smoothing and polishing gold as well as all other metals to a high luster.  Recommended maximum 1,000-5,000 RPM.

This silicone, large cylinder, coarse grit abrasive wheel is impregnated with silicon carbide for deburring, cleaning, smoothing and polishing gold as well as all other metals to a high luster.  Recommended maxikum 1,000-5,000 RPM

This silicone, large cylinder, medium abrasive wheel is impregnated with silicon carbide is great for deburring, cleaning, smoothing and polishing gold as well as all other metals to a high luster.  REcommended maximum 1,000-5,000 RPM.

This silicone, large cylinder, extra fine wheel is impregnated with silicon carbide is great for deburring, cleaning, smoothing and polishing gold as well as all other metals to a high luster.  Recommended maximum 1,000 - 5,000 RPM.

Silicone abrasive square edge extra fine wheel is impregnated with silicon carbide is great for deburring, cleaning, smoothing and polishing gold as well as all other metals to a high luster.  Recommended maximum 1,000-5,000 RPM.

Transite is a non-asbestos, heat reflective material.  This hard Transite board is extremely durable and withstands temperatures up to 2800 degrees.

12" x 12" size

6" propane melting timp designed with multiple orifice for maximum melting power of up to 3 ounces of gold, silver or bronze.  

6" acetylene melting tip with multiple orifice for maximu melting power of up to 3 ounces of gold, silver or bronze.

Non-asbestos fireproof material is fibrous so it is soft enough that one can pin objects on the surface for perfect soldering.Good for filigree work as surface stays smooth.  Lightweight 3.7 oz., yet durable so it‘s easy to ship.  Withstands temperatures up to 2000° F.

Dimensions 6"x3"x2"

Non-asbestos soldering pads which are durable, smooth, and heat reflective.  Fairly hard so as not to flake or crumble.  Highly fame resistant and non combustible, these long lasting, all purpose pads can be used to protect surfaces from burning.  This board is considered a hard board.  Meets OSHA standards.  Maximum temperature 1700 degree fahrenheit

12"x12"x3/4" dimensions

Pickling compound for gold silver and copper based alloys.  Non-flammable and non-explosive  1 pound size

Bent inside ring 14k 3/4mm stamp

Quality USA made karat stamp.  Made on 1/4" round heat treated tool steel.   This 18k stamp is 3/4mm in size and is bent.

Quality USA made karat stamp.  Made on 1/4" round heat treated tool steel. This stamp is a 3/4mm bent 24k stamp.

3/4mm bent sterling inside ring stamp 

1mm Bent sterling stamp used to stamp inside of rings

1mm Straight sterling stamp 

Quality USA made karat stamp.  Made on 1/4" round heat treated tool steel.  This stamp is a 3/4mm straight sterling stamp.

6 1/2" long tweezer, mounted on a weighted base to hold items stable and secure in any position while soldering.  This enables user to have both hands free while working.  Base diameter 3"

16" flask tongs to retrieve hot flasks, steel.

Durable and flexible hoses for The Small Torch come standard with "B" fitting and include an "A" fitting adapter with each.  This set is a 6’ length.

Gentec has been selling torches and welding accessories worldwide for over 60 years.  I personally use a torch from Gentec, to make sure that the product was good, and I am truly satisfied with this product.  I have always used Smith products and this is comparible.  The "Small Torch"  provides stable and precise concentrated feather flame.   Durable and flexible hoses "B Connection" (9/16") with "A"(3/8") fittings adapter included.  All components carry a limited two year warranty from the factory.    Each basic kit comes with The Small Torch handle, five tips, and 12’ oxygen and fuel hoses  

Model 3A tumbler with a simple 3 lb. capacity barrel offers the user economy and performance.  Designed for years of trouble free service, the 3A is a real workhorse.  The barrel is hard rubber to minimize noise and the durable motor will last for years.  Simple to operate and UL approved.  WEight:  5 lbs. One year warranty

This powder compound I have found to be excellent when tumbling jewelry or PMC.  This is to be used with either stainless steel shot or ceramic mediums. 

Sold in 1/2 pound or 1 pound increments 

1/2 pound $6.00

1 pound  $11.50

Dumont, high precision tweezer.  Carbon steel 4 1/2" length (115 mm)

Economy tweezer used for soldering and various jobs where fine point tweezers would bend.  4 1/4" length

Fiber grip soldering tweezers.  Overall length is 6 1/4"  This fiber helps prevent the tweezer from heating up.

12" length chrome plated steam tweezers with thick coating on tips

3/32" uniform shank twist drill set of 12.  Polished steel twist drills with uniform shanks can be used with a quick-change or Jacobs chuck-style handpiece.  In the set of 12 sizes are from 0.50mm - 1.60mm

Plastic strainer with nylon mesh used with the ultrasonic or steamer.  4" diameter basket.

Double ended vulcanite wax file, 8" standard model.  One end is medium cut and the other end coarse.